COMPRESSION TESTING MACHINE

+91-11-25920433

+91-11-41428065

Model: ASI-617 TO ASI-623

As Per IS : AS PER IS STANDARD

This is a separate console housing an oil tank, electric motor, relay etc.

Inside the oil tank are mounted two pumps which are worked with the help of a cam rotating inside the tank.

The cam is rotated by the electrical motor and belt.

Above the tank is fitted a hand pump.

All plungers are accurately machined and no oil seals are used.

Special non-return valves are fitted in the pumping system for trouble free long service,

A dip stick is provided to know the oil level in the tank.

A drain to remove oil is fitted at the base of the tank.

The pumping unit has on its front panel a slow-fast lever to control the rate of loading,

a release valve and a slit to enable a rod to be inserted in the hand pump to operate the pumping unit manually.

A pressure gauge is fitted in front at a convenient angle.

The pressure gauge has 200 divisions for its full capacity,

Inside the pressure gauge is fitted a micro switch.

This micro swich automatically cuts off electrical supply to the pumping unit on reaching full capacity of the pressure gauge.

A red dummy pointer is fixed on the cover glass of the pressure gauge to record maximum load at the failure of the specimen.

The pumping unit works on 230 volts A.C. or 415 volts, 3 phase supply.

This pumping unit is connected to the load frame by means of pressure pipes.

Additional pressure gauges (maximum 2 Nos.) of lower capacities with isolation valves can be fitted on the pumping unit.

Note:

Digital versions of electrically operated Compression Testing Machines can also be supplied.

The digital versions have 0.5% accuracy.

Various Models of Compression Testing Machines are avaiLable listed in the following table.

Model	ASI-617	ASI-618	ASI-619	ASI-620	ASI-621	ASI-621	ASI-623
Cap. in KN.	150	150	150	250	250	500	500
Readable to in KN	0.75	0.75	0.75	1.25	1.25	2.5	2.5
Load Frame Type	Pillar	Pillar	Channel	Pillar	Pillar	Pillar	Pillar
Pumping Unit Ram Dia	H/O 75	Ele/H 75	H/O 75	H/O 90	Ele/H 90	H/O 116	Ele/H 116
Max. clearence Between Platens,	200	200	200	200	200	250	250
Platen Size.	100	100	100	125	125	150	150
Elec. motor H.P.	-	1	-	-	1	-	1
Note: Standard Machines are supplied for operation on 415 volts, Three phase, 50 H2 supply can be supplied for operation on 230 volts, single phase, A.C. supply on specifying , while placing orders, at extra cost.

Model	ASI-624	ASI-625	ASI-626	ASI-627	ASI-628	ASI-629	ASI-630
Cap. in KN.	1000	1000	1000 2 Guage	1500	1500	2000	2000 2 Guage
Readable to in KN	5	5	0.250 x 1.25 0-1000 x 5	7.5	7.5	10	0.500 x 2.5 0-1000 x 5.0 0-2000 x 10.0
Load Frame Type	Pillar	Pillar	Channel	Pillar	Channel	Pillar	Pillar
Pumping Unit	H/O	Ele/H	H/O	H/O	Ele/H	H/O	Ele/H
Ram Dia	166	166	166	216	216	216	216
Max. clearence Between Platens,	330	330	330	330	330	330	330
Platen Size.	180	180	180	180	225	225	225
Elec. motor H.P.	-	1	1	1	1	1	1
Note: Standard Machines are supplied for operated for operation on 415 volts, three phase, 50 H2 supply. Can be supplied for operation on 230volts,single phase, A.C. supply on specifying, while placing orders, at extra cost.

Capping Set (Horizontal)

Model : ASI-587B

Kelley Ball Penetration Apparatus

Model : ASI-511

Pulveriser

Model : ASI-235

Wide Range of Testing Machines