Particular

Specification

Load capacity

2.5Kn  (2500 Newton)

No. of load cell

One

Speed Accuracy

<0.2%

Cross head Speed

0.1 mm/minute to 1020mm/minute through Lead Screw

Stroke (LRX)

1 to 750 mm

Stroke ( LRX-e)

1 to 1500 mm

Load resolution

< 0.005% of load cell used (max)

Extension Resolution

< 5 micron

Data Sampling Rate

40Hz

Extensometer Input

+10V DC analog input

Data output

Digital RS232 Analog input

Power

115/230 V AC ± 10% 50-60 Hz

Operating Temp

5° to 35 °C (40°F to 95°F)

Other

Result are display in Touch Screen as well as through PC

Highly accurate position control with high range of Speed

Automatic calculation of results Selectable

Safety norms of over load in auto/ manual mode

Data lock for calibration

Suitable for checking all types of material as per customer requirement.

NOTE : 

Speed can control Through AC Drive  variable speed we are providing from 0.1 mm to 1020 mm/minute which is possible only through Ac Drive  and touch screen panel where you just put speed on touch screen panel for e.g. 5 mm / minute and the machine with start at desired speed and if you put 300 mm / minute the machine will start at desired speed

Accuracy of the machine should be within its tolerance limit

of+ or - 1%

Machine have TFT Touch Screen display unit/computerized which can shows load, Elongation, Maximum Load, Breaking load and it can save at least last 5 samples reading.