+91-11-25920433

+91-11-41428065


2 1

Plate Bearing Test

Model: ASI-920

As Per IS : 1888-1962

This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded. Maximum bearing capacity is noted as that load at which the plate starts sinking rapidly.
 
Specifications:
 
The basic outfit consists of : 50 tone Hydraulic jack with separate pumping unit fixed to a 0- 500KN x 0.5KN. Pressure gauge and flexible metal piper 5 mtr long- 1No. Special ball and socket arrangement between the jack and the bearing plate-1No. Extension rod 12mm. dia. x 25cm. long for taking dial gauge readings-16 Nos. Magnetic base with female thread on top for holding extension rod-4Nos. Top end plate, 50mm, dia. with male thread for fitting onto the extension rods and positioning the dial gauge plinger-4Nos. Column 15cm. dia. x 25cm long with flanges complete with four bolts and nuts- 2Nos. Column 15cm. dia. x 50cm long with flanges complete with four bolts and nuts- 1Nos. Bridge support of welded steel angel construction, 5mtr. Span and stands approximately 30cm, high, fitted with two quick release clamps a for positioning and holding the dail bracket-2Nos. Plane M.S. Plate 60cms x 60cms. Square x 25mm thick plane M.S. Plate 45cmx square x 25mm thick plane M.S. Plate 30cms x 30cmx square x 25mm thick Dial Gauge 0.01mm x 25mm- 4Nos.
 
Accessories:
 
Plane M.S. Plate 75cm x 25mm thick plane M.S. Plate 50cmx 25mm thick Grooved M.S Plate 60cms x 60cms x 25mm thick grooved M.S. Plate 45cms x 45cms x 25 mm thick Grooved M.S. Plate 30cms x30cms x 25mm thick Grooved M.S. Plate 75CMS x 75cms x 25mm thick
 
Note:
 
1) When plates of size more than 30cm.sq are used in order to prevent deflections of the edge, a series of smaller plates are advised to be placed concentrically on the bottom plate.
2) Flexible rubber pipe 1mtr. Length can be supplied for the hydraulic jack in place of metal pipe at extra cost. For site testing load trusses to meet the reaction of loading are avaiLable in different capacities as under.